Xerox 12.7 B 114 manual Release Notes, Sets, Specific, Copying ARCH-E size prints

6 Release Notes

The following information supplements the 12.5 customer user guides.

6.1 Sets

For 600 DPI engines (6030, 6050, 6050A, and 6204) the maximum number of ARCH E sized documents that will collate reliably in a set is 150. If the documents will not collate properly, one copy of the set will be printed only. This is for sets created using the scanner as well as printed sets submitted across the network.

6.2 6204 Specific

6.2.1 Copying ARCH-E size prints

To maximize copying of ARCH-E size prints always copy them using the preset output format ARCH-E. When copied in synchro mode it is likely that ARCH-E documents will scan as 1220mm and will incur unneeded pauses between printing pages. The 6204 IOT will pause between pages which are greater than ARCH-E (48 inches 1219 mm) in length for the fuser to come all the way back to full temp even if it is in the nominal fuser temperature range.

6.2.2 Specifying titleblock for copies

When making a copy on the 6204 multi-function system which is intended to be folded you must specify the titleblock as seen through the facedown page. The example below shows the titleblock in the lower left corner:

6204 Scanner

Document

Page 10