Xerox 2101 manual Network, Printing

Xerox 2101

Network

￿If your Novell network is configured to print a banner page with multiple copies of a job, you will receive as many copies of the banner page as copies of the job. If you have specified stapling, the banner page is stapled to the job. To print successfully, ask your network administrator to disable the banner page.

Printing

￿In the Windows 2000 printer driver, the settings “Automatically Select” and “Auto Select” both appear as a paper source. Select either one to allow the Fiery EX2101 to select the paper source automatically.

￿The server will not allow multiple paper sources to be used in a single print job. If the supply tray runs out of paper in the middle of a print job, the server will require the user to refill the tray before completing the job.

￿Job Notes (Notes 1 and Notes 2) may not be available when you print from the PCL driver.

￿If you cancel a job that requires an unavailable paper size, the Fiery EX2101 Controller reboots. To avoid this problem, make sure the copier has the necessary paper before you print.

￿The default setting for the point and print driver is PS. To change the default to PCL, on the LCD menu, select Run Setup>Network Setup>Service Setup and then select PCL.

￿If you attempt to install a PnP PCL5 driver on a Microsoft Windows 2000 client before installing it on the server, the Microsoft Windows NT PCL5 driver will be installed. To ensure correct installation of the PnP PCL5 driver, install it on the server side before installing it on the client.

￿Installing the PCL printer driver on Microsoft Windows XP by Point and Print is not supported. You can install the Postscript printer driver on Microsoft Windows XP by Point and Print.

￿Due to a system memory usage limitation, large print jobs with Collate and Reserve options may pause before completion.

Workaround: Cancel the current print job and change the options to Collate and Forward.

￿In order for an A4 MSWord document to print long edge feed (LEF) via the Fiery PS driver, the document Paper Size must be defined as A4 P. At the PS Print Driver, the Paper Source Size must also be defined as A4 P.

2-2	Xerox 2101
	GETTING STARTED