2.Configuring the Printer for the Network

Configuring the Printer for the Network with the Control Panel

After installing the optional Network Interface Board, configure it for the network using the printer's control panel.

If you use TCP/IP, you should assign the IP Address and Subnet Mask. You can also set the Gateway Address using the printer's control panel.

Note

❒When you turn the machine's pow- er switch on, it may take a few minutes to initialize the optional Network Interface Board. If the “2. Network Setup” in the following step 4. is shaded, wait for a few minutes.

Reference

For more information about using this machine as a network printer, see the “Quick Configuration Guide” which is provided as a PDF file on the CD-ROM labeled “Operating Instructions for Printer”.

A Press {User Tools/Counter}.

Dial

k Dial

se/ ial

ZENS058E

B Press the 0or 1key until the following message appears on the panel display.

C Press {OK}.

The following screen appears on the panel display.

D Press the 0or 1key until the following message appears on the panel display.

E Press {OK}.

The following screen appears on the panel display.

F Press {OK}.

The following screen appears on the panel display.

13