Installing the Printer Driver and Software

Quick Install

Auto Run starts the installer automatically when you load the CD-ROM in the CD-ROM drive. By selecting Quick Install, you can install the necessary software easily.

TCP/IP requires the following:

•This machine must be connected to the network through the network inter- face cable.

•This machine must be turned on.

3 • The TCP/IP protocol must be configured.

•An IP address must be allocated to this machine and to the computer.

Limitation

❒If your system is Windows 2000, Windows XP, or Windows NT 4.0, installing a printer driver by Auto Run requires Administrators permission. When you install a printer driver by Auto Run, log on using an account that has Admin- istrators permission.

Note

❒Auto Run might not automatically work with certain OS settings. In this case, launch "Setup.exe" located on the CD-ROM root directory.

If you want to cancel Auto Run, hold down the {SHIFT} key (when your system is Windows 2000, hold down the left {SHIFT} key) while inserting the CD-ROM. Keep the {SHIFT} key held down until the computer has finished accessing the CD-ROM.

A Close all applications that are running.

B Insert the CD-ROM into the CD-ROM drive.

Auto Run will start the installer.

C Select a language to change the interface language, and then click [OK].

The following languages are available: Cestina (Czech), Dansk (Danish), Deut- sch (German), English (English), Espanol (Spanish), Francais (French), Italiano (Italian), Magyar (Hungarian), Nederlands (Dutch), Norsk (Norwegian), Pol- ski (Polish), Portugues (Portuguese), Suomi (Finnish), Svenska (Swedish)

Default interface language is English.

D Select [Quick Install].

E The software license agreement appears in the [License Agreement] dialog box.

After reading through all of the contents, click [I accept the agreement] to agree with the license agreement, and then click [Next].

16