Xerox 5632 manual Cleaning the Machine, Document Glass and Constant, Velocity Transport Glass

Maintenance

number.

CAUTION: When replacing consumables, DO NOT remove the covers or guards that are fastened with screws. You cannot maintain or service any of the parts that are behind these covers and guards. Do NOT attempt any maintenance procedure that is NOT specifically described in the documentation supplied with your machine.

Cleaning the Machine

WARNING: When cleaning the machine do NOT use organic or strong chemical solvents or aerosol cleaners. Do NOT pour fluids directly onto any area. Use supplies and cleaning materials only as directed in this documentation. Keep all cleaning materials out of the reach of children.

WARNING: Do not use pressurised air-spray cleaning aids on or in this equipment. Some pressurised air-spray containers contain explosive mixtures and are not suitable for use in electrical applications. Use of such cleaners can result in a risk of explosion and fire.

1	Document Glass and Constant
	Velocity Transport Glass
	¾ Apply Xerox Cleaning Fluid or Xerox	Constant velocity
	Anti-Static Cleaner, to a lint-free cloth.	transport glass
	Liquid should never be poured directly
	onto the glass.

¾Wipe clean the entire glass area.

¾Wipe away any residue with a clean cloth or paper towel.

NOTE: Spots or marks on the glass will be reproduced on the prints when copying from the document glass. Spots on the Constant Velocity Transport Glass will show up as streaks on the prints when copying from the document handler.

2	Touch Screen
	¾ Use a soft, lint-free cloth, lightly
	dampened with water.
	¾ Wipe clean the entire area, including
	the Touch Screen.
	¾ Remove any residue with a clean cloth
	or paper towel.
	For more information about maintaining other areas of your machine please refer to the
	Interactive User Guide CD (CD2), contained in the CD Pack delivered with your machine.

Page 28 Quick Use Guide