7 Installing Windows utilities
10. If you are prompted, browse to the location of the NET_WSCK.INI file that has been
customized for your site.
If you do not have a customized NET_WSCK.INI file, you can use the default file. If
you use the default file, make sure that you configure the Chooser list before you try to
use the utilities. See “Configuring the Chooser list for Windows 95 and Windows NT
4.0” on page 7 for instructions.
11. Click OK when you are informed that installation is complete.
Configuring the Chooser list for Windows 95 and Windows NT 4.0
If you are using Windows 95 with an IPX/SPX network, or using Windows NT 4.0
with a TCP/IP network, you must configure the Chooser list for your server.
NOTE:You should reconfigure this file whenever there is a change to your DocuColor
server or network that affects the information in the file.
TO PREPARE TO EDIT THE CHOOSER LIST:
• If you are using IPX/SPX, print the Configuration page from the Control Panel to
determine the IPX address and server name.
In general, you should use the Ethernet IPX address. If you are connected through a
Token Ring network, use the Token Ring IPX address.