Xerox 701P40210 manual Custom and Colored Stock hints

Stock Management and Calibration

Table 3-1. DocuSP Sample Stock Grouping

Other	Digital Color Gloss Cover	3r11333	210	93.7	(L* <= 93.7)
	Digital Color Colotech+ Gloss Coated	3r95224	120	93.7
	Digital Color Colotech+	3r97098	280	93.7
	Digital Color Colotech+ Gloss Coated	3r97163	280	93.6
	Digital Color Colotech+	3r94668	220	93.5
	Digital Color Gloss Text	3r11336	140	93.4
	Digital Color Graphics White Fiber	3r11166	105	93.4
	Digital Color Colotech+	3r94661	200	93.3
	Digital Color Colotech+	3r94646	100	93.3
	Digital Color Colotech+	3r94656	160	93.3
	Digital Color Gloss Text	3r11330	120	93.2

Custom and Colored Stock hints

It is recommended that you place all your stocks, including new or custom stocks, in one of the three pre-existing color groups. This limits the need for calibration to three groups of halftones.

It may be useful to place all colored stocks into a single group. Since all colored stock by definition will have a lower white point than L* 93.7, the non-white stocks are expected to be placed in the Other color group. However, you may prefer the results you achieve using white or bright white profiles on the non-white stock.

A simple way to determine which color group would be best for your specific colored stock is:

1.Add your stock to a tray.

2.If desired, within [Printer Manager: Trays], select the option to force feed from the tray. Alternatively, you can just program a specific stock for your job.

NOTE: The option to force feed from a tray is not available on the iGen3.

3.Submit a job to a hold queue on the controller. The job should contain a variety of image types, i.e. photos, halftones, and graphics, as well as text. You should be familiar with how this job prints on white coated or uncoated stock.

4.Open properties for the job within Job Manager.

Color Management Guide 3-11