Safety notes
The Stacker 1000 is designed and tested to meet strict safety requirements. These requirements include safety agency examination and approval and compliance to any established environmental standards. Please read the following instructions carefully before operating the stacker.
Note: In order to ensure safe operation of your stacker, refer to the instructions, as needed, which are provided in this operator manual.
Follow all the warnings and instructions which are marked on or supplied with the product.
Unplug the stacker from the wall outlet before cleaning. Always use materials which are supplied or approved by Xerox. The use of other materials may result in poor performance and could create a hazardous situation.
Do not use aerosol cleaners.
Never use supplies or cleaning materials for any purposes other than what they were intended. Keep all supplies and materials out of the reach of children.
Do not use the stacker near water, wet locations, or outdoors.
This product is equipped with a
This stacker must be operated from the type of power source which is indicated on the marking label. If you are not sure of the type of power available, consult your local power company.
If an extension cord is used with this stacker, ensure that the total of the ampere ratings of any products plugged into the extension cord does not exceed the extension cord ampere rating. Also, ensure that the total amperage of all products plugged into the wall outlet does not exceed the outlet protection.
Do not install the stacker in a direct sunlit area, in a high humidity or dusty environment, nor in a
Stacker 1000 Operator Manual | 1 |
Safety notes |
|
