Xerox READY TO BUILD SET INSERT DOCUMENT: 1 MEMORY 100.0

74 • Special features keys XEROX WIDE FORMAT COPY SYSTEM
• FORWARD prints the collated set in the order that the
sheets were scanned. Page 1 will be on the top.
PRINTED
1
2
3
SCANNED
1
2
3
• REVERSE prints the set in the reverse order that they were
scanned. Page 1 will be on the bottom.
1
2
3
SCANNED
3
2
1
PRINTED
3. Regardless of the collation order chosen, if you want a printed
copy (checkplot) after you scan each document, before they are
printed as a set, then select the CHECKPLOT box.
4. Press the
Enter key to confirm your choice. The READY TO
BUILD SET screen is displayed.
READY TO BUILD SET
INSERT DOCUMENT: 1
MEMORY
100.0
%
A
UTO
Ready to Build Set Screen
5. Insert each document of the set, one at a time, into the Scan
System as prompted by the display. As the documents are
scanned, the amount of memory used is shown in the
rectangular graphical display.
NOTE: You can select reduction/enlargement and copy quality settings
for each sheet prior to scanning that sheet.
6. When the set is completely scanned, press the Sets Build key
again. The Sets Build indicator lamp is extinguished when the
Start key is pressed then the READY TO PRINT SET screen is
displayed.
READY TO PRINT SET
PRESS START TO PRINT
100.0
3
Ready to Print Set Screen
7. If desired, you can now make further changes to the Media
Selection, Source selection and the Reduction/Enlargement