Depending on how you chose to set your wireless network for this test, you can either
Now that your mobile device has been configured for first time use, you should not have to repeat these steps. You can turn your wireless access point back on and whenever you are away from your network, you can scan directly to your tablet or phone.
Scanning to Eye-Fi
After you have successfully configured your mobile device, you can then scan any time following these simple steps:
1.Open
2.Turn on the scanner power.
3.All of the LEDs will flash as the scanner initializes. When the scanner is ready to scan, a single LED will be lit next to the first function represented by a camera icon.
4.Tap the function button on the scanner to cycle through the scan options until the LED is lit next to the option you want to use to scan.
Scans in color at 300dpi and creates a JPG (*.jpg) file.
(note that a thumbnail of the image is displayed in the document view for this file type) Scans in black & white at 300dpi and creates an Adobe PDF (*.pdf) file.
(note that a generic palm tree icon is displayed in the document view for this file type) Scans in color at 300dpi and creates an Adobe PDF (*.pdf) file.
(note that a generic palm tree icon is displayed in the document view for this file type)
5.Insert an item face up in the paper feed slot, aligned to the left side of the scanner.
6.The scanner detects the page and starts to feed it through the scanner.
Note that there will be a short pause after you insert the page before the scanner starts to feed the page. This pause allows you to straighten the item in the paper feed slot.
7.The scanner starts scanning, when finished it is saved to the
Creating Multiple Page PDF Files
1.Turn on the scanner
