Manual Dial

Manual Dial

Pick up the optional handset or the handset of the external telephone and dial.

When the line is connected and you hear a high-pitched tone, press the {Start} 1 key to send your fax document. If, on the other hand, you hear a voice at the oth-

er end, continue conversation as normal.

Important

The optional handset or an external telephone is required.

This function is not available for the optional extra G3 interface unit, Internet Fax and IP-Fax.

If Immediate TX Result Report (Immediate Transmission) is printed, the re- sult of a transmission with Manual Dial is not mentioned in the report.

A B

Place the original, and then select the scan settings you require.

Pick up the handset.

You will hear a dial tone.

C Dial.

The machine immediately dials the destination.

If you make a mistake, replace the handset, and then try again from step B.

To select a destination from the Address Book, see “Using the Address Book to Specify Destinations”.

D When the line is connected and you hear a high-pitched tone, press the {Start}key to send your fax document.

If you hear a voice, tell the receiver that you want to send them a fax document (ask them to switch to facsimile mode).

The transmission starts.

E Replace the handset.

If you want to cancel a transmission, press the {Clear/Stop}key, and then remove the originals.

After transmission, the standby display appears.

99