Xerox DP 820 manual Advanced Menu, RGB YCbCr YPbPr

User Controls

Advanced Menu

Auto Source Select—The projector automatically scans the connected input sources and selects the type that is connected.

•To activate this option, select it, then press the Menu/Enter

button on the projector control panel or the button on the remote control.

Rear—Projects a reversed image so you can project from behind a translucent screen.

•To activate this option, select it, then press the Menu/Enter

button on the projector control panel or the button on the remote control.

Ceiling—Projects an image upside down for a ceiling-mounted projection.

•To activate this option, select it, then press the Menu/Enter

button on the projector control panel or the button on the remote control.

ECO Mode—Dims the projector’s lamp output to lower power consumption and increase lamp life.

•Press the buttons to select this mode.

ON—The lamp output is reduced OFF—The lamp output is not reduced

Lamp Hours—Displays the lamp’s elapsed operating time (in hours) since the lamp timer was reset. The lamp hours counter that tells you the elapsed operating time cannot be manually adjusted.

Color Space—Selects the type of input signal.

•Press the buttons to select the color space.

RGB YCbCr YPbPr

Xerox DP 820 User’s Guide 25