Basic Printing
1.Lower Tray 1 (MPT).
2.Adjust the paper guides to the size of the paper.
The arrow on the width guide, displayed in the following graphic, must line up with one of three positions identified on the labeled area next to the width guide. Push firmly to move the width guide so that the arrow points to the correct position for the paper size you are using:
■SRA3 (displayed in a black field): Do not use this setting for custom size printing.
■12” (displayed in a gray field): Use this setting for paper widths of 11.75 in. - 12 in. (298 mm - 305 mm)
■All other sizes (indicated by a black arrow)
