Installation
12 Xerox© LCD Monitor User’s Manual
1 Turn off the computer and unplug the power cord.
2 Connect the signal cable to the D-SUB port on the back of
the computer.
3 Connect the audio cable to the out port on the back of the
computer.
4 Connect the power cord to the LCD monitor and wall outlet.
5 Press the button, located on the bottom side of the main
unit to turn the monitor on, then turn the computer on. If the
monitor displays an image, the monitor is successfully
installed. If no image is displayed, check all connections.
Refer to the owner’s manual of the computer for connections.
In the process of connecting external equipment, do not connect
any AC power cords to wall outlets until all other connections
are completed.
2 Installation
Connecting Your LCD Monitor to a Computer
Method 1 : Analog (D-SUB) Connection