Page 32
Configuring Other Routers on your LAN
All traffic for devices not on the local LAN must be forwarded to the MULTI-WAN GATEWAY so that it
can be forwarded to the Internet. This is done by configuring other Routers to use the MULTI-WAN
GATEWAY as the Default Route or Default Gateway, as illustrated by the example below.
Static Routing - Example

Router B

(192.168.2.90) (192.168.3.70)

Router A

Segment 0

Segment 2

Segment

1

(192.168.1.xx)
(192.168.2.xx) (192.168.1.100)
(192.168.1.1)
(192.168.3.xx)
(192.168.2.80)

Figure 4-3: Routing Example

For the MULTI-WAN GATEWAY Gateway's Routing Table

For the LAN shown above, with 2 routers and 3 LAN segments - the MULTI-WAN GATEWAY requires
2 entries as follows:
Entry 1 (Segment 1)
Destination IP
Address 192.168.2.0
Network Mask 255.255.255.0
Gateway IP Address 192.168.1.100
Interface LAN
Metric 2
Entry 2 (Segment 2)
Destination IP 192.168.3.0