Xtant owner manual Specifications, XTANT2.2, XTANT4.4

SPECIFICATIONS

	XTANT2.2	XTANT4.4
Frequency Response:	20 Hz-20 kHz ±1dB	20 Hz-20 kHz ±1dB
Number of Channels:	2	4
Watts per Channel @ 4Ω:	2 x 50	4 x 50
Watts per Channel @ 2Ω:	2 x 100	4 x 100
Bridged Mono @ 4Ω:	1 x 200	2 x 200
Recommended Load:	≥2Ω Stereo / ≥4Ω Bridged	≥2Ω Stereo / ≥4Ω Bridged
Distortion (THD):	≤.1%	≤.2%
20 Hz-20 kHz
at rated power, all channels
driven 4Ω
Signal to Noise Ratio:	≥ 100dB	≥ 100dB
A-weighted
in 20 kHz noise bandwidth
@ 1 volt sensitivity
Damping Factor:	≥ 200 @ 100 Hz	≥ 100 @ 100 Hz
	with 4Ω load	with 4Ω load
Input Sensitivity:
Unbalanced	100 mV-8.5 V RMS	100 mV-8.5 V RMS
Balanced	200 mV-17 V RMS	200 mV-17 V RMS
Input to Line Output Gain:	0dB	0dB
On-Board Crossover:	HP: 12dB/Oct,	Front-HP:12dB/Oct,
	40-120 Hz	40-120 Hz
	LP: 24dB/Oct Mono,	Rear-HP: 12dB/Oct,
	40-120 Hz	or LP:24dB Mono LP,
		40-120 Hz
Balanced Line:	On Board	On Board
Power Supply:	Fully Regulated, PWM	Fully Regulated, PWM
Operational Voltage:	10-16 Volts	10-16 Volts
Fusing Requirement:	30 Amp	60 Amp
Size (L x W x H):	1111⁄16" x 91⁄16" x 2"	159⁄16" x 91⁄16" x 2"
	297mm x 230mm x 51mm	395mm x 230mm x 51mm
A.R.C.:	0-15dB Level Adjustment	0-15dB Level Adjustment
Bass Boost:	0-12dB @ 45 Hz	0-12dB @ 45 Hz
Warranty:	Limited 4 Year Parts	Limited 4 Year Parts
	and Labor	and Labor

3