Xtant3.1/Xtant6.1 Amplifier Owner’s Manual
WELCOME TO XTANT
Congratulations on your Xtant amplifier purchase. The concept is
Xtant products are only available through the finest, most
With your purchase of Xtant mobile audio, you publicly confirm your status as a connoisseur of fine music. We salute you and welcome you to our family.
Welcome to Xtant!
INSTALLING YOUR XTANT AMPLIFIER
All Xtant amplifiers and accessories are intended to be installed by an
In the event you decide to install your new Xtant product(s), please take the time to read this Owner’s Manual in its entirety. Installation and/or use of your amplifier in applications or methods other than those specified in your Xtant amplifier owner’s manual may result in a reduction of the overall performance capability of the amplifier. Any such installation or usage renders the prod- uct warranty void. The following guidelines are designed to assure a safe and properly installed Xtant Mobile Audio System.
We strongly recommend that you acquaint yourself with your Xtant amplifier’s available features and spend some time designing a system most suitable for you. Consider the components you have now, those you have and plan to upgrade, and those you plan to add in the future.
FRANÇAIS | PG 11 |
ESPAÑOL | PG 19 |
DEUTSCH | PG 27 |
xtant.com
SPECIFICATIONS
|
| XTANT3.1 | XTANT6.1 | ||
Frequency Response: |
| 20 | 20 | ||
Number of Channels: |
|
| 1 |
| 1 |
Watts per Channel @ 4Ω | : | 1 x 150 | 1 x 300 | ||
Watts per Channel @ 2Ω | : | 1 x 300 | 1 x 600 | ||
Recommended Load: |
| ≥ | 2Ω | ≥ | 2Ω |
Distortion (THD): |
| ≤ | 2% |
| ≤ 2% |
20 |
|
|
|
|
|
at rated power, all channels |
|
|
|
| |
driven 4Ω |
|
|
|
|
|
Signal to Noise Ratio: |
| ≥ 100dB | ≥ | 100dB | |
|
|
|
|
| |
in 20 kHz noise bandwidth |
|
|
|
| |
@ 1 volt sensitivity |
|
|
|
|
|
Damping Factor: |
| ≥ 100 @ 100 Hz | ≥ 100 @ 100 Hz | ||
|
| with 4Ω load | with 4Ω load | ||
Input Sensitivity: |
|
|
|
|
|
Unbalanced |
| 100 | 100 | ||
Balanced |
| 200 | 200 | ||
Input to Line Output Gain: | 0dB |
| 0dB | ||
| 24dB/Octave Low Pass | 24dB/Octave Low Pass | |||
Balanced Line: |
| On Board | On Board | ||
Power Supply: |
| Fully Regulated, PWM | Fully Regulated, PWM | ||
Operational Voltage: |
| ||||
Fusing Requirement: |
| 40 Amp | 80 Amp | ||
Size (L x W x H): |
| 1111⁄16" x 91⁄16" x 2" | 159⁄16" x 91⁄16" x 2" | ||
|
| 297mm x 230mm x 51mm | 395mm x 230mm x 51mm | ||
Subsonic Filter: |
| 24dB/Octave | 24dB/Octave | ||
Bass Boost: |
| ||||
Warranty: |
| Limited 4 Year Parts | Limited 4 Year Parts | ||
|
| and Labor | and Labor |
3