Xtant Model 603x manual XTANT 603X SPECIFICATIONS

XTANT 603X SPECIFICATIONS

Frequency Response	5 Hz to 50 kHz +/– 1 dB
Number of Channels		3
Watts per Channel @ 4Ω	2 x 75	+ 1 x 150
Watts per Channel @ 2Ω	2 x 150	+ 1 x 300
Bridged Mono @ 4Ω (Stereo Channels)		1 x 300
Recommended Load (stereo channels)	>2Ω Stereo / >4Ω Bridged
Recommended Load (Mono channel)		>2Ω
Distortion (THD)		< .04%

Measured: 20 Hz to 20 kHz at rated power, all channels driven 4Ω

Signal to Noise Ratio > 100 dB

Measured: A-weighted in 20 kHz noise bandwidth @ 1 volt sensitivity

Damping Factor	> 200 @ 100 Hz with 4Ω load
Input Sensitivity	100 mV to 8.5 V RMS Unbalanced Source
	100 mV to 17 V RMS Balanced Source

Input to Line Output Gain 0 dB +/– 20 dB, Selectable in 10 dB steps

On-Board Crossover	12 dB (Butterworth) or
	24dB (Linkwitz-Reily)
Module Port(s)	4
Power Supply	Fully Regulated, PWM
Operational Voltage	11 to 15 Volts
Fusing	Requires 100 Amp
Warranty	Limited 4 Year Parts and Labor

S E E P A G E E L E V E N O F T H I S M A N U A L F O R C O M P L E T E D E T A I L S

6