•Place a Xyron® Design Disc™ into the bottom of the Xyron® Design Disc™ Maker. (fig.1)
• Each letter on the keypad corresponds to | (fig.1) |
| |
a numbered design. Look at the insert |
|
that comes with the Design Disc and use
the chart below to select the desired designs.
General Information
• The Xyron® Design Disc™ Maker will turn off after 5 minutes without |
use. Any typed text that has not been saved will be lost. |
• You cannot save to or erase Design or Font discs. |
• The Xyron Design Disc Maker uses one 9V battery (included). |
• Use the Xyron® Design Runner™ Accessory Kit with the Xyron® Design |
Runner™ to print perfectly straight lines, italics and symmetrical arcs. |
• For portability and convenience, store the Xyron® Design Disc™ Maker |
with the Xyron® Design Runner™ in the Xyron® Design Runner™ Carry |
Bag. |
• The Xyron® Design Disc™ Maker uses only Xyron® Design, Font and |
Blank Discs. |
• When a Blank Disc is inserted into the Blank Disc Slot, the available |
k+i+g= 
• Only the letters |
corresponding to your |
selected designs, not the |
designs themselves, will |
5
7
memory will appear on the LCD screen as a fraction. For example, |
50/215 means that there is space for up to 50 uppercase, full sized |
letters on the disc for a total of 215 spaces. |
• If you plan to print your custom phrases with the Xyron Design Runner |
using Continuous Mode, program a space at the end of the phrase or |
show on the LCD screen. |
• Select the desired size. |
• Press the save button. |
11
2
9
13
3
(Design Disc insert example)
design to ensure proper spacing. |
7
8
