USER’S MANUAL
☞NOTE
■When using AC power at 60Hz(NTSC), 50Hz(PAL), frequency, you can use the L/L type synchronization.
■When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.
• MOTION DET :This product has a feature that allows you to observe movement of objects in
8 different areas on the screen, and the | 1 SENS T V TY | AREA1 | |
2 AREA MODE | ON | ||
words 'MOTION DETECTED' appear on the | |||
3 SEL POS | L TOP | ||
screen when movement is detected. | 4 XPOS | 3 | |
Activity can be monitor more efficiently. | 5 YPOS | 5 | |
6 F LL → SET |
|
1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates 'MOTION DET’.
2) Set up the mode using the Function Setup switch.
-SENSITIVITY:You can select up to 8 MD areas. When SENSITIVITY number is high, motion detection sensitivity is increased to recognize even small movement.
-AREA MODE: Determines whether to use the MD area selected in SENSITIVITY.
-SEL POS: Determines which of the 4 vertices of each MD area is to be used.
-XPOS: Determines the coordinate of the horizontal axis for SEL POS.
-YPOS: Determines the coordinate of the vertical axis for SEL POS.
-FILL→SET: Fills in a selected MD area. The color of the area can be selected from brown, orange, blue, cyan, green, yellow, magenta and red.
-RETURN:Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
•PRIVACY: Mask an area you want to hide on the screen.
PRVACY AREA SETUP
1 AREA | AREA1 | |||
2 MODE | OFF | |||
3 MASK COLOR | GREEN | |||
4 MASK TONE | 1 | |||
5 TOP | 39 | |||
6 BOTTOM | 79 | |||
7 LEFT | 13 | |||
8 R GHT | 52 | |||
9 RETURN |
|
|
|
|
|
|
| ||
|
|
|
18