CONNECTIONS
Connecting the power cable
POWER | VOLTAGE |
MANAGEMENT | SELECTOR |
To the wall outlet with the power cable
PREPARATION
| (Taiwan and Central/South America models) |
■ POWER MANAGEMENT switch | ■ Connecting the power cable |
Enables or disables the automatic power down function. When the automatic power down function is enabled, this unit will automatically switch to standby mode if no operations are performed for 8 hours.
Plug the power cable into the wall outlet after all other connections are complete.
■VOLTAGE SELECTOR switch (Taiwan and Central/South America
models only)
The VOLTAGE SELECTOR switch on the rear panel of this unit must be set for your local main voltage BEFORE plugging the power cable into the wall outlet.
Improper setting of the VOLTAGE SELECTOR switch may cause damage to this unit and create a potential fire hazard.
Select the switch position (left or right) according to your local voltage using a straight slot screwdriver. Voltages are AC
