Adjusting the BALANCE control

Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused from speaker location or listening room conditions.

BALANCE

0

l l

2 2

33

4 4

L 5

5 R

Selecting the SPEAKER system

Because one or two speaker systems can be connected to this unit, the SPEAKERS switches allow you to select speaker system A or B, or both at once.

SPEAKERS

Adjusting the BASS and TREBLE controls

BASS : Turn this clockwise to increase (or counterclockwise to decrease) the low frequency response.

TREBLE : Turn this clockwise to increase (or counterclockwise to decrease) the high frequency response.

BASSTREBLE

l DEFEAT l

l DEFEAT l

2

2

2

2

3

3

3

3

4

4

4

4

5

5

5

5

TURNOVER FREQUENCY switch <For AX-1070 only>

These switches can be used to adjust the turnover point of the tone controls: either 200 Hz or 400 Hz for BASS and either 2.5 kHz or 5 kHz for TREBLE. This gives you flexible control over bass and treble response characteristics.

TURNOVER FREQUENCY

400Hz 2.5kHz

200Hz5kHz

Adjusting the continuously variable LOUDNESS control

This control provides compensation for the human ears’ loss of sensitivity to high and low-frequency ranges at low volume. This control is adjustable to retain full tonal range at any volume level.

1

LOUDNESS

0

9 Set to the “FLAT” position.

8

6 7

2

Set to the loudest listening level that you would listen to.

3

LOUDNESS

0

9 Turn so that the desired volume can

8 be achieved.

6 7

10