English

9BASS control

Used to increase or decrease the low frequency response. The

DEFEAT position produces flat response.

0TURNOVER FREQUENCY switches

Used to adjust the turnover point of the BASS and TREBLE controls respectively. This gives you flexible control over bass and treble response characteristics.

ATREBLE control

Used to increase or decrease the high frequency response.

The DEFEAT position produces flat response.

BSUBSONIC FILTER switch

Used to cut out undesirable ultra-low-frequency signals caused by turntable rumble or warped records without losing sound quality.

CMODE switch

This switch can be used for switching between stereo and monaural operation. Normally this switch should be set to the STEREO position.

DBALANCE control

Adjusts the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions.

EContinuously variable LOUDNESS control

Used to compensate for the human ears’ loss of sensitivity to high and low-frequency ranges at low volume.

FREC OUT selector

This switch can be used to select a program source and supply that source directly to the REC OUT terminals on the rear panel, independently of the setting of the INPUT selector. This function allows you to record the selected program source while listening to another program source.

GPHONO (MM/MC) switch

This switch can be used to select either the MM (moving magnet) or MC (moving coil) position to match the phono cartridge used. (Refer to page 12 for details.)

7