Yamaha AX-490, AX-590 OPERATIONS, TO PLAY A SOURCE, AX-590, AX-490, To turn off the power, BASS, POWER, TREBLE, BALANCE, LOUDNESS, *AX-590only, PHONO (MM/MC)

AX-590

AX-490

OPERATIONS

2	7
	1, 6

4	7	3
2		7
		1, 6

4 7 3

TO PLAY A SOURCE

1	VOLUME
	l8	l6	l4
20			l2
24			l0
28			8
34			6
40			4
50			3

602

70l

0

–dB

Set to the “∞ ” position.

2 Turn the power on.

POWER

3 Select a desired input source.

	INPUT
TAPE 1	CD
	TUNER
TAPE 2	PHONO
AUX

*AX-590 only

If you select turntable as an input source (PHONO position), you should confirm that the PHONO (MM/MC) switch on the rear panel is set to the position corresponding to the type of cartridge being used by the turntable. (Refer to page 4.)

4 Select the speakers to be used.

SPEAKERS

AB

ON ON

OFF OFF

*If you use two speaker systems, press both the A and B switches.

5	Play the source.
6		VOLUME
	20	l8	l6	l4
				l2
	24			l0
	28			8
	34			6
	40			4
	50			3

602

70l

0

–dB

Adjust to the desired output level.

7 If desired, adjust the BASS, TREBLE, BALANCE and

LOUDNESS controls, etc. (Refer to page 9–10.)

To turn off the power

Press the POWER switch again.

7