OPERATIONS
7
2 1, 6
4 7 3
TO PLAY A SOURCE1 | VOLUME | ||
l8 | l6 | l4 | |
20 |
|
| l2 |
24 |
|
| l0 |
28 |
|
| 8 |
34 |
|
| 6 |
40 |
|
| 4 |
50 |
|
| 3 |
602
70l
0
Set to the “∞ ” position.
2 Turn the power on.
POWER
3 Select a desired input source.
*If you select turntable as an input source (PHONO position), you should confirm that the PHONO (MM/MC) switch is set to the position corresponding to the type of cartridge being used by the turntable. (Refer to page 9.)
4 Select the speakers to be used.
SPEAKERS
*If you use two speaker systems, press both the A and B switches.
5 | Play the source. |
|
|
|
6 |
| VOLUME | ||
20 | l8 | l6 | l4 | |
|
|
| l2 | |
| 24 |
|
| l0 |
| 28 |
|
| 8 |
| 34 |
|
| 6 |
| 40 |
|
| 4 |
| 50 |
|
| 3 |
602
70l
0
Adjust to the desired output level.
7 If desired, adjust the BASS, TREBLE, BALANCE and LOUDNESS controls, etc. (Refer to page
To turn off the power
Press the POWER switch again.
CD DIRECT AMPLIFIER
Setting the INPUT SELECTOR to the CD position automatically sends the signals from the CD player (connected to the CD input terminals on the rear of this unit) to the
6