Using the PURE DIRECT switch

You can enjoy the purest possible sound from your audio sources by setting this switch so that the indicator illuminates. By doing so, the audio signals bypass the BASS, TREBLE, SUBSONIC FILTER, BALANCE, LOUDNESS controls and the PRE OUT/MAIN IN terminals, thus eliminating any alterations to the audio signals.

PHONO (MM/MC) switch

Select either MM or MC position depending on your PHONO cartridge, Moving Magnet or Moving Coil type. However, if you use a high output MC cartridge, select MM position.

To select the MC position, press this switch so that it is held inward. To select the MM position, press this switch so that it is released outward.

English

PURE

DIRECT

Setting the SUBSONIC FILTER switch

If you set this switch to “ON” position, undesirable ultra-low- frequency signals caused by turntable rumble or warped records can be cut out without losing sound quality.

SUBSONIC

FILTER

PHONO

MC

MM

When you listen with headphones

Connect the headphones to the PHONES jack. When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position.

PHONES

Open/close the control door

When it is not necessary to operate controls inside the control door, close the door.

To close the door

To open the door

9