9
Component Names & Functions
qDisplay
Displays information for the currently selected patch or operating conditions of the MAGICSTOMP.
wCONTROL Knobs
These are used to control patch parameters. (→ page 14)
eVOLUME Knob
Controls the overall output volume of the MAGICSTOMP. (→ page 12)
rSTORE/EXIT Button
This button is used to store edited patches in the MAGICSTOMP (→ page 18), exit the Deep Edit
Mode (→ page 15), or Name Edit Mode (→ page 20).
t– Switch, + Switch, ON/OFF Switch
These switches select patches, switch the patch ON or OFF, or switch modes. (→ page 12, 13, 20,
22)
yINPUT Jack
For connecting an instrument such as a bass guitar, synthesizer, etc., to the MAGICSTOMP. (→ page
11)
uINPUT LEVEL HIGH/LOW Switch
Selects HIGH or LOW impedance to match the input level with the output level of the instrument
connected to the INPUT jack. (→ page 11)
iOUTPUT L/MONO, R Jacks
For connecting the MAGICSTOMP to a bass amplifier, recorder, PA mixer, etc. (→ page 11)
oUSB Jack
For connecting the MAGICSTOMP to a computer. This lets you edit patch voices on the computer or
move patch data between the computer and the MAGICSTOMP. (→ page 27)
!0 AC IN Jack (Power Adaptor)
Connect the power adaptor to this jack. (→ page 10)
*Power is switched ON when the power adaptor is connected (and supplying power) to the main unit.
!1 PHONES Jack
A pair of headphones connected to this jack (stereo mini) let’s you practice or edit patches while
monitoring the MAGICSTOMP’s sound output through the headphones. Use the Volume Knob e to
adjust the volume.
*Output is still delivered from the OUTPUT jack i when a pair of headphones is connected to the PHONES jack.
05.11.17, 9:40 AMPage 9