Other connections
■Connecting to the REMOTE CONTROL jacks
–You can transmit and receive the remote control signals by connecting to the REMOTE CONTROL (OUT/IN) jacks.
–Firmly connect monaural 3.5 mm mini plug cables (commercially available) to the REMOTE CONTROL (OUT/IN) jacks.
–If your AV receiver is a Yamaha product and has the capability to transmit SCENE control signals, you can control the Player with the SCENE function.
Caution!
Do not connect the power cable of this Player until all connections are completed.
Hints
–For details about the SCENE function, refer to the owner’s manual supplied with your Yamaha AV receiver.
–You can connect a Yamaha component (such as CD player) supports the SCENE function to the REMOTE CONTROL (OUT) jack of this Player.
■Connecting the power cable
–After all connections are completed, plug the supplied power cable into the AC IN on the rear of the Player. Then plug into AC outlet.
AC IN 
2
Connection
RK
This Player
AUDIO OUT
R | L | OUT | IN |
REMOTE CONTROL
To AC inlet
To REMOTE CONTROL (OUT) jack
Monaural 3.5 mm mini plug cable (commercially available)
To remote 
control in 
jack 
To REMOTE
CONTROL (IN) jack
Monaural 3.5 mm mini plug cable (commercially available)
To remote
control out jack
To AC outlet
Note
–TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH THE
REMOTE CONTROL IN | REMOTE CONTROL OUT |
Yamaha component Infrared signal receiver or Yamaha component (such as AV receiver)