Yamaha C L P - 3 8 0

Message List

CLP-380 Owner’s Manual 105

Detailed Settings

When you attempted to rename a song and save it in “Rename” (page 43), this message will

appear if an identically-named song already exists. Three seconds after this message is

displayed, you will return to the previous screen. Please specify a different name.

This message prompts you to execute a ﬁle-related operation. Press the B [+ (YES)] button

to proceed, or press the [EXIT] button to cancel.

The Clavinova is processing the data internally. Wait until the message disappears, then

proceed to the next step.

This message appears when factory set is completed. The instrument is then restarted.

The normal (factory default) settings (including the memory song setting) (“FactorySet” on

page 102) have been restored. This message also appears if you press and hold down the C7

and turn on the power to the Clavinova (page 102).

The normal (factory default) settings (except for the memory song setting) (“FactorySet” on

page 102) have been restored.

This message will appear when loading of the backup ﬁle is completed. The instrument is

then restarted.

There is a problem with the USB [TO HOST] terminal

•When using the CLP-380 connected to your personal computer:

The driver or MIDI application on your computer is not functioning correctly, perhaps

because the computer is turned off, the cable is not connected correctly. In this case, turn

off the power of the CLP-380 and your computer, and check the cable connections. Then

turn on the power in the order of your computer

→

CLP-380, and check that the driver

and MIDI application on your computer are functioning correctly.

•When using the CLP-380 by itself:

This message may appear if a cable is left connected to the USB [TO HOST] terminal of

the CLP-380. In this case, turn off the power of the CLP-380, disconnect the cable, and

then turn on the power again. If the cable is left connected, the CLP-380 may not function

correctly.

This message will appear when the power is turned on after turning off the power while

saving a song or internal settings. The internal memory is being checked while this message

appears. If the internal settings are damaged, they will be reset to the initial settings. If

Memory songs are damaged, they will be deleted.

This message appears when you attempt to create a folder to a USB storage device that

cannot be accessed. Check that the USB storage device is connected to the instrument and

that the [SELECT] switch speciﬁes the appropriate device, then try again.

There is not enough memory space left and you cannot save any more songs. Save songs to

an external device (page 42) or delete some songs in the storage memory, then save new data

to memory.

A USB storage device was not connected to the instrument when you attempted to perform

a drive-related function. Connect the device and continue.

•This message will appear when there is no ﬁle to load from the media, even if the ﬁle name

is displayed. Securely insert the media.

•This message will appear when two-byte letters are included in the ﬁle name.

Message Meaning

DuplicateName

Execute?-->

Executing

FactorySet Completed

Restart

FactorySet Executing

MemorySongExcluded

FactorySet Executing

MemorySongIncluded

FullBackup Completed

Restart

HostError

LastPowerOffIllegal

MemoryChecking

MakeDir

---:Select USB Drive

MemoryFull

NoDrive

NoFile