Yamaha C L P - 3 8 0

Message List

CLP-380 Owner’s Manual 107

Detailed Settings

This message appears when you record or edit the protected song and select another song.

The recorded/edited protected song cannot be saved. The song will be deleted when you

select another song.

You tried to perform another operation before saving the recorded song to storage memory

or an external device. If you continue the operation, the recorded song will be lost. To delete

the new recording, press the B [– (NO)] button. To keep the recording, press the B [+ (YES)]

button. The Clavinova displays the “Save” parameter screen. Save the recorded song and

proceed to another operation.

This message will appear if a problem is found with the song data when you select a song or

while the song is playing. In this case, reselect the song, and try once again to play it back. If

the message still appears, the song data may have been damaged.

1. This message will be displayed if current memory ﬁlls up during recording. Recording will

stop automatically at this point. The data that had been recorded up to that point will

remain. This message will also be displayed when you attempt to enter Record mode for

additional recording if that song already occupies all of current memory. In this case,

additional recording will not be possible. If there is an already-recorded part that you do

not need to keep, you can use “ChannelClear” (page 84) to delete the unneeded part, so

that you will then be able to record the equivalent amount of additional material.

2. This message will be displayed when you select a song if that song is larger than the

capacity of the current memory (page 39). This song cannot be loaded into the CLP-380,

and cannot be played back. Please select a different song.

This message prompts you to start the operation. To start, press the B [+ (YES)] button.

Press the [EXIT] button to cancel the operation.

This message prompts you to conﬁrm the execution. Press the B [+ (YES)] button to

continue. Press the B [– (NO)] button to cancel.

This message appears when the number of ﬁles and folders exceeds the system limit. The

maximum number of ﬁles/folders which can be stored in a folder is 250. Try again after

deleting/moving the unnecessary ﬁle(s).

You tried to perform a ﬁle- or drive-related operation using an unformatted media. Eject the

media, format it using the “Format” parameter (page 46), then try again.

You tried to perform a ﬁle- or drive-related operation using an unformatted media. To

cancel the operation, press the B [– (NO)] button. To format the disk and try again, press the

B [+ (YES)] button to display the format parameter (page 46).

This message appears when you connect an unsupported drive. Use a drive whose

compatibility has been conﬁrmed by Yamaha (page 122).

•The connected drive does not support use of protected songs. Use only drives whose

compatibility has been conﬁrmed by Yamaha (page 122).

•This message appears when the connected USB storage device is damaged and cannot be

accessed.

You used a period or space at the beginning of a song name or you tried to change a song

name that includes a character (or characters) not supported by the CLP-380, and the CLP-

380 could not process the name. The Clavinova displays the previous screen in three

seconds. Rename the song correctly.

This message appears when, in copying a song, the same folder has been selected for both

the source and destination. You cannot select the same folder for both the source and

destination. Select the different folder as the destination folder.

Message Meaning

SongChanged Clear?

SongChanged Save?

SongError

SongTooBig

Start?-->

Sure?-->

SystemLimit

UnformattedDrive

UnformattedDrive Format?

UnsupportedDrive

WrongDrive

WrongName

WrongSelection