Detailed Settings
CLP-380 Owner’s Manual
78
Detailed Settings
Voices [VOICE SETTING]
In Dual mode, parameters with the “ ” mark are set for Voice 1 and Voice 2 individually.
iAFC [iAFC SETTING]
*
Settings Parameter name Reference page
Setting the octave* Octave 87
Setting the volume level* Volume 87
Setting the position of right and left channels* Pan 87
Make fine adjustments to the pitch (only in Dual mode) Detune 87
Selecting the reverb type ReverbType 88
Setting the reverb depth* ReverbSend 88
Selecting the chorus type ChorusType 88
Setting the chorus depth* ChorusSend 88
Setting the chorus on/off ChorusOnOff 89
Selecting the DSP type* DSP Type (DSP) 89
Setting the speed of the vibraphone vibrato effect* VibeRotorSpeed 89
Tur ning the vibraphone vibrato effect on/off* VibeRotorOnOff
(RotorOnOff)
89
Setting the rotation speed of the rotary speaker* RotarySpeed
(Rot.Speed)
90
Adjusting the depth of the DSP effect* DSPDepth 90
Adjusting the brightness of the sound* Brightness 90
Adjusting the resonance effect* HarmonicContent
(Harmonic)
90
Adjusting the low-range frequency of the equalizer* EQ LowFreq.
(EQ L.Freq)
90
Adjusting the low-range gain (amount of boost/cut) of the
equalizer*
EQ LowGain 91
Adjusting the high-range frequency of the equalizer* EQ HighFreq.
(EQ H.Freq)
91
Adjusting the high-range gain (amount of boost/cut) of the
equalizer*
EQ HighGain 91
Setting the touch sensitivity* TouchSense 91
Settings Parameter name Reference page
Tur ning iAFC on/off iAFC 92
Adjusting the Dynamic Damper Effect depth DynDmpFX Depth 92
Adjusting the Spatial Effect depth SpatialFX Depth 93
Calibration (automatic adjustment) Calibration 93
Restoring the default calibration setting iAFC Default 93