Other settings [FUNCTION]
CLP-380 Owner’s Manual 99
Detailed Settings
This parameter is effective on the voices, such as “Grand
Piano 1.”
See the procedure on page 80.
Setting range:
Off, 1 – 10
This parameter is effective only on the voice group
“GRANDPIANO1.”
See the procedure on page 80.
Setting range:
Off, 1 – 10
You can adjust the volume of the key-off sound (the
subtle sound that occurs when you release a key)
This is effective on the voice groups “Grand Piano1,”
“Harpsichord,” and “E.Clavichord” and on the voice
“E.Piano2.”
See the procedure on page 80.
Setting range:
Off, 1 – 10
This specifies the amount of change that can be produced
by the pitch bend function which smoothly varies the
pitch.
This setting applies only to the manually-played sound.
This setting can be made in semitone steps.
You can set the pedal function (page 96) to specify
whether the pitch will be raised or lowered.
See the procedure on page 80.
Setting range:
0 – +12 (Pressing the pedal will raise/lower the pitch by 12
semitones [1 octave])
Normal setting:
2
This setting lets you switch the speaker on/off.
See the procedure on page 80.
Setting range:
Normal (HeadphoneSW).... The speaker will sound only if
headphones are not connected.
On....................................... The speaker will always sound.
Off....................................... The speaker will not sound.
Setting the depth of string resonance
[StringResonanceDepth]
Setting the depth of sustain sampling
for the damper pedal
[SustainSamplingDepth]
Specifying the volume of the key-off
sound
[KeyOffSamplingDepth]
B
D
NO YES
A
C
StringResonanceDepth
5
B
D
NO YES
A
C
SustainSamplingDepth
5
B
D
NO YES
A
C
KeyOffSamplingDepth
5
Setting the range of pitch bend
[PitchBendRange]
Switching the speaker on/off
[Speaker]
B
D
NO YES
A
C
PitchBendRange
2
B
D
NO YES
A
C
Speaker
Normal(HeadphoneSW)