CONNECTIONS
Connecting the supplied power cable
Asia and General models only
Europe and U.K. models
To the wall outlet with the supplied power cable
■VOLTAGE SELECTOR(Asia and General models only)The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging the supplied power cable into the wall outlet.
Improper setting of the VOLTAGE SELECTOR may cause damage to this unit and create a potential fire hazard.
Rotate the VOLTAGE SELECTOR clockwise or counterclockwise to the correct position using a straight slot screwdriver.
Voltages are as follows:
.............................. AC
Plug the supplied power cable into the AC IN on the rear panel of this unit and then plug the power cable into the wall outlet after all other connections are complete.
Connecting USB devices
This unit has a USB port and can access MP3 or WMA files saved on your USB device. Connect your USB device to the USB port on the front panel of this unit.
CAUTION
Do not disconnect your USB device while playing back from the USB device, or when the USB indicator blinks.
■Supported USB devicesThis unit supports USB mass storage class devices (e.g., flash memories, card readers or portable audio players) that use FAT16 or FAT32 format.
Notes
•Some devices may not work properly even if they meet the requirements.
•Do not connect devices other than USB mass storage class devices: USB chargers, USB hubs, PCs, external HDD, etc.
•When you insert two or more memory cards at the same time into a card reader connected to the USB port on this unit, only one of the memory cards is recognized.
•Yamaha and suppliers accepts no liability for the loss of data saved on the USB devices connected to this unit. As a precaution, it is recommended that the files are made backup copies.
•Playability of and power supply to all kind of USB devices are not guaranteed.