BASIC OPERATION

■Playing back USB devices

USB

Connect your USB device to the USB port on the front panel. (For details, refer to page 8.)

When USB mode is selected (USB indicator lights up), first filename is displayed in the front panel display (refer to page 12), and playback starts automatically in order by date and time of creation if playable files are in the USB device.

To disconnect USB devices

Press to stop playback, and then disconnect the USB device.

Note

Do not disconnect your USB device while playing back from the USB device, or when the USB indicator blinks.

Turning off the power

Press POWER again.

If you turn off the power when disc mode is selected, the next time you turn the power on, playback starts automatically of the disc on the tray. If you turn off the power when USB mode is selected, playback will start automatically of the USB device connected.

Playing back a desired track

Audio CD

Select a desired track by using the numeric buttons.

Example: To select track number 12

Press “1”, and then press “2”.

+

Following information is displayed.

Pausing playback

Audio CD

 

Data Disc

 

USB

Press e.

To resume playback, press eagain (or press h).

Stopping playback

Audio CD

 

Data Disc

 

USB

Press s.

If you press hagain, playback starts from the first track.

10 En

The selected track number

Playback starts in 2 seconds.

Note

This operation is not available for Data Disc and USB.

y

You can also select and playback a desired track during playback.

To improve audio quality (PURE DIRECT mode)

Audio CD

 

Data Disc

 

USB

Press PURE DIRECT.

This unit is set to PURE DIRECT mode.

•The PURE DIRECT indicator lights up.

•The digital output is turned off.

•The front panel display is turned off and only the minimum required indicators and messages are displayed during playback.

Note

Connect using the ANALOG OUT terminals when you use PURE DIRECT mode (refer to page 7).