Notes
●You can set as many as 20 programs at a stretch.●If you will make program setting with the DISC 1 tray empty, be sure to press the DISC SKIP button before starting program setting.
●The total time of the programed tracks will not be displayed, if tracks are selected from more than one disc.
●The total time of the programmed tracks will not be displayed, if the number of track higher than 20 is programmed.
●If, during program setting, the TIME display
●The SKIP ( 
and 
) button can be used during playing, but only within the range of the programmed tracks.
●The SEARCH ( 
and 
) button can be used during playing to search through all tracks, including unprogrammed tracks.
To stop program play
●Press the STOP button. The first track number programmed will be displayed.●To resume play, press the PLAY/PAUSE button. Play will begin from the beginning of the program.
To cancel a programmed setting
There are several methods, as described below.●Press the CLEAR button on the
To check programmed data
1.If the unit is in the play mode, press the STOP button.2.Press the PROG button.3.Each time the SKIP 
button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by
button.To correct programmed data
1.Follow the procedure described in “To check programmed data”.2.Display the track number to be corrected by pressing the SKIP button.3.Press a numeric button on the remote control transmitter to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed.
4.After the correction has been completed, press the PROG button or PLAY/PAUSE button once again.
11