Yamaha CDC-625 To stop play temporarily, To stop play completely, To play a desired track on the disc, DIRECT PLAY, SKIP PLAY, Display information at disc play, (twice)

To stop play temporarily To stop play completely

or

*To resume play, press the PLAY/PAUSE button again

(or press the PLAY or PAUSE button on the remote control transmitter).

To play a desired track on the disc

DIRECT PLAY

Select a desired track by using the numeric buttons on the remote control transmitter.

The selected track number is displayed.

Example: To select track 25

Press ➀ twice, then immediately press ➁ once.

➀➁

*If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played.

SKIP PLAY

●To play from the beginning of the track following the one now playing

●To play from the beginning of the track now playing

●To play from the beginning of the track before the one now playing

(twice)

*These operations can also be performed when the unit is in the pause or stop mode.

Display information at disc play

➀ ➁ ➂ ➃

➄

➀Encloses the tray number of the disc standing by to be played or the disc now playing.

➁Shows the tray numbers with discs.

➂ Shows the track number to be played.

➃ Shows the time displays. (Refer to “Selecting time

displays” on the next page.)

➄ Displays the numbers that correspond to the numbers of the tracks (as high as number 20) on the disc. After each track is played, its corresponding number disappears so the number of remaining tracks (and their numbers) can be seen at a glance.

7