Display information during programming

PROG

TOTAL

REMAIN

1 2 3 4 5 6 7 8 9 10

➀

➀Shows the side of the tape and the program number for the track to be programmed next.

➁Shows the selected disc and track number.

➂Shows the total remaining time on the side of the tape.

➃ Programmed track numbers light up and programmable track numbers among the unprogrammed ones flash on and off.

*If “A-01” does not appear in the display after thePROG button is pressed, press the TIME display mode-select button.

➁➂

PROG

TOTAL

REMAIN

1 2 3 4 5 6 7 8 9 10

➃

■Random sequential tape programming

The unit will automatically program tracks on a disc in random sequential order for recording to tape.

PROG TAPE REPEAT RANDOM

1 2 3 MODE

4 5 6 +10

7 8 9 0

DISC SKIP

 

DISC

 

 

SCAN

 

SKIP

PAUSE

PLAY

SEARCH

INDEX

STOP

 

– OUTPUT LEVEL +

SYNCHRO

 

 

2

3, 4 4

1 Follow step 1 – 5 on page 18.

2

RANDOM

*The unit will automatically program tracks for side A and side B separately considering the tape’s total time.

3 Begin recording on the tape deck and press the PLAY button on this unit at the same time.

4 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit.

Notes

●Because the programmed data changes every time the RANDOM button is pressed, the amount of time remaining at the end of the tape also changes accordingly.

●If the tape’s length is not enough, all tracks cannot be programmed. In this case, exchange the tape for a longer one.

●In step 2, you can check the program data for side A and side B.

➀➁

PROG

TOTAL

1 3 5 7

➂

➀Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A.

➁Shows the total time of programmed tracks for each side.

➂ Shows the programmed track numbers for each side.

●CD synchronized recording function can be used if your tape deck is compatible with it.

In this case, in step 3 and 4, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins.

(For details, refer to page 17.)

20