Yamaha CDC-565, CDC-665 To stop play completely, To stop play temporarily, PLAYXCHANGE, Display information at disc play, The, PLAY, DISC, Note, Notes, RANDOM, DISC SKIP, DISC SKIP

Notes

●After closing the disc tray by pressing the OPEN/CLOSE button when this unit is stopped or after selecting any disc by using the DISC SKIP button when this unit is stopped, the display shows the total number of tracks and the total recorded time of the selected disc for a few seconds.

5DISC

TOTAL

1 2 3 4 5 6 7 8 9 10 11 12

●Additionally, you can close the disc tray by pressing the

PLAY ( ) button, a DISC-select button on the front panel, a numeric button or the RANDOM button, or by pressing the front edge of the disc tray gently. If the tray is closed in these ways, play will begin automatically, however, the display will not show the total number of tracks and the total recorded time of the first selected disc.

PLAYXCHANGE

During play, you can open the disc tray by pressing the PLAYXCHANGE button on the front panel without interrupting disc play. However, in this case, pressing the DISC SKIP button has no effect.

Note

You can load or replace discs on the trays when the disc tray is opening, however, never load a disc on the tray hidden inside the unit. In doing so, the disc and the unit may be damaged, because the tray already has a disc, which is being played.

Display information at disc play

➀ ➁ ➂ ➃

5DISC

REMAIN

3 4 5 6 7 8 9 10 11 12

➄➅

➀Encloses the tray number of the selected disc.➁ Lights up the tray numbers with discs only.

*All tray numbers light up when the power turns on, and whenever the disc tray rotates to change a disc selected, a tray number with no disc goes off.

➂Shows the selected track number.➃Shows the time displays. (Refer to “Selecting time displays” on page 11.)

➄Displays the numbers that correspond to the numbers of the tracks (as high as number 20) on the selected disc. After each track is played, its corresponding number disappears so the number of remaining tracks (and their numbers) can be seen at a glance.

➅CDC-765 and CDC-665 only

Shows the level of signals output into an amplifier or the headphone level adjusted by using the OUTPUT LEVEL button.

English

To stop play temporarily	To stop play completely
PAUSE	STOP
or	or
(On the front panel)	(On the front panel)

To resume play, press the PAUSE button again (or press thePLAY button).

*The (PLAY/PAUSE) button on the front panel can also be used to stop play temporarily or to resume play.

9