Changing brightness of the display

If desired, you can change brightness of the display in three degrees by pressing the DIMMER button.

Normal illumination

DIMMER

Slightly dimDim

CDC-675 only

Adjusting the level of signals output into an amplifier, etc.

You can adjust the level of sound signals output from the LINE OUT terminals on the rear panel into an amplifier, etc. as you prefer by using the OUTPUT LEVEL buttons.

–OUTPUT LEVEL +

or

OUTPUT LEVEL

–+

(On the front panel)

For optimum sound quality

*When the DIGITAL AUDIO OUT (OPTICAL) terminal is used for the connection, set the level of output signals to max.

*The level of output signals can be checked in the display.

CDC-675 only

When you listen with headphones

Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL buttons.

*Note that the use of the OUTPUT LEVEL buttons will also vary the level of the signal output to an amplifier, etc.

PHONES

12