CD SYNCHRONIZED RECORDING

This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely.

This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.)

*This unit and the tape deck must be placed close to each other so that they can receive the signals from this unit’s remote control transmitter at the same time.

1

4

3

1 2 3 MODE

4 5 6 +10

7 8 9 0

DISC SKIP

 

DISC

 

 

SCAN

 

SKIP

PAUSE

PLAY

SEARCH

INDEX

STOP

 

– OUTPUT LEVEL +

SYNCHRO

 

 

4

5

1 Select the disc.

DISC SKIP

2 Load a tape on the tape deck.

*To record from the beginning of the tape, rewind the tape to the full end of the supply reel.

*The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 20.)

3

SYNCHRO

This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode.

*In this mode, the time display on this unit flashes on and off.

4 If necessary, select the desired track.

SKIP

4

or

5

PLAY

Both CD play and tape deck recording begin.

* CD play begins a little later than recording.

Notes

•To finish or stop the recording, make proper operations on the tape deck.

•Programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to page 12–13 for the programming procedure.)

•This function can also be used together with the automatic tape-programming function.

(Refer to page 17–19.)

21