Yamaha CDC-745, CDC-845 To stop play temporarily, To stop play completely, To play a desired track on the disc, SKIP PLAY, DIRECT PLAY, Display information at disc play

To stop play temporarily

PLAY/
PAUSE	PAUSE

*To resume play, press the PLAY/PAUSE button again

(or press the PLAY or PAUSE button on the remote control transmitter).

To stop play completely

STOP

To play a desired track on the disc

DIRECT PLAY

Select a desired track by using the numeric buttons.

+10 1 2 3 4 5 6 7 8 9 0

The selected track number is displayed.

SKIP PLAY

●To play from the beginning of the track following the one now playing

SKIP

●To play from the beginning of the track now playing

SKIP

Example: To select track 25

Press ➀ twice, then immediately press ➁ once.

+10 1 2 3 4 5 6 7 8 9 0

➀➁

*If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played.

●To play from the beginning of the track before the one now playing

SKIP

(twice)

*These operations can also be performed when the unit is in the pause or stop mode.

Display information at disc play					➀ Encloses the tray number of the selected disc.
					➁ Shows the tray numbers with discs.
					➂ Shows the selected track number.
					➃ Shows the time displays. (Refer to “Selecting time
	➀	➁	➂	➃	displays” on page 9.)
					➄ Displays the numbers that correspond to the numbers of
					the tracks (as high as number 15) on the disc. After each
					track is played, its corresponding number disappears so the
					number of remaining tracks (and their numbers) can be
					seen at a glance.
					➅ Shows the level of signals output into an amplifier or the
		➄		➅	headphone level adjusted by using the OUTPUT LEVEL
					control.

8