Yamaha CDX-10 PROGRAM PLAY, SKIP, TAPE, SEARCH, Flashes, display.), In step 2, if, numeric button, 1 Stop the unit, If, during programming, the

PROGRAM PLAY

You can enjoy listening to your favorite tracks in any desired order by programming tracks. As many as 25 tracks can be programmed in sequence.

			DIMMER	TIME
		OPEN/
2		CLOSE
	PROG	TAPE	CLEAR	PEAK
	SPACE	S/F		RANDOM
			REPEAT
	1	2	3	+10	3
	4	5	6
	7	8	9	0	4
	SKIP		PAUSE	PLAY	1
	SEARCH		INDEX	STOP
		SYNCHRO
1 Stop the unit.			3 Program a desired track by pressing the corresponding
				numeric button.
STOP					5

English

2

* Repeat this operation to program more tracks. You can select the same track again.

4

PROG PLAY

PROGRAM

TOTAL

Flashes.

Display information during programming

PROGRAM

TOTAL

➀

➁➂

PROGRAM

TOTAL

➀Shows the program number for the track to be programmed next.➁Shows the selected track number.➂Shows the total time of the tracks currently programmed.

*If the total time becomes 100 minutes or more, the highest position of a figure will not be displayed.

Notes

•In step 2, if “P-01” does not appear in the display, press the TIME display mode-select button.

•If, during programming, the TIME display mode-select button is pressed, the program number display can be changed to display the total time of the programmed tracks. To return to the previous display, press the TIME display mode-select button once again.

•The SKIP ( and ) button can be used during playing, but only within the range of the programmed tracks.

•The SEARCH ( and ) button can be used during playing to search all tracks, including unprogrammed tracks.

•The PAUSE mode can also be programmed (one time only), if so desired, by pressing the TAPE button instead of a

numeric button. (In this case, “	B” is illuminated on the
display.)

•If, for a compact disc with 25 tracks or more, track number 25 or higher is programmed, the total time will disappear from the display.

11