TRACK PROGRAMMING FOR RECORDING TO TAPE

This convenient feature can be used to program tracks on a disc for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape.

nAutomatic tape-programming

The unit will automatically program tracks on a disc with the original order of tracks unchanged.

1 Stop the unit.

STOP

*The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 17.)

2 If desired, you can automatically insert additional time space between tracks. (Refer to page 9.)

SPACE

SPACE

3 Enter the tape’s total possible recording time.

TAPE

You can select any of four tape lengths by pressing the TAPE button.

TAPE

(off)

4 Otherwise, you can also enter the tape’s total possible recording time manually.

Example: For a C-64 tape (32 minutes on each side)

6

4

 

+

OPEN/CLOSE DIMMER TIME

3

PROG

TAPE

CLEAR

PEAK

 

2

SPACE

S/F

 

RANDOM

5

 

 

REPEAT

 

1

2

3

+10

 

4

5

6

 

4

 

7

8

9

0

7

SKIP

PAUSE

PLAY

6, 7

SEARCH

INDEX

STOP

 

 

SYNCHRO

 

1

5 Press the REPEAT button.

S/F

REPEAT

The unit automatically programs tracks for side A and side B separately considering the tape’s total time.

6 Begin recording on the tape deck and press the PLAY button on this unit at the same time.

7 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit.

Notes

•All tracks may not be programmed if the tape’s length is not enough. To program all tracks, use a longer tape.

•In step 5, you can check the program data for side A and side B.

➀➁

PROGRAM

ATOTAL

1 2 3 4 5

➂➃

➀Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A.

➁Shows the total time of programmed tracks for each side.➂ Shows the side of the tape.➃ Shows the programmed track numbers for each side.

•CD synchronized recording function can be used if your tape deck is compatible with it. If so, in step 6 and 7, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 18.)

14