Yamaha CDX-390 nRandom sequential tape-programming, RANDOM, 1 Follow steps 1 – 4 on page, ➂ Shows the side of the tape, ➃ Shows the programmed track numbers for each side

nRandom sequential tape-programming

The unit will automatically program tracks in random sequential order for recording to tape.

	OPEN/CLOSE		DIMMER	TIME
	PROG	TAPE	CLEAR	PEAK
	SPACE	S/F		RANDOM
			REPEAT
	1	2	3	+10
	4	5	6
	7	8	9	0
4	SKIP		PAUSE	PLAY
	SEARCH		INDEX	STOP

2

3, 4

1 Follow steps 1 – 4 on page 14.

2

RANDOM

*The unit will automatically program tracks for side A and side B separately considering the tape’s total time.

3 Begin recording on the tape deck and press the PLAY button on this unit at the same time.

4 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit.

Notes

•Because the programmed data changes every time the RANDOM button is pressed, the amount of time remaining at the end of the tape also changes accordingly.

•If the tape’s length is not enough, all tracks cannot be programmed. In this case, exchange the tape for a longer one.

•In step 2, you can check the program data for side A and side B.

➀➁

PROGRAM

ATOTAL

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

➂➃

➀Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A.

➁Shows the total time of programmed tracks for each side.

➂ Shows the side of the tape.

➃ Shows the programmed track numbers for each side.

•CD synchronized recording function can be used if your tape deck is compatible with it. If so, in step 3 and 4, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 18.)

16