CLP-110

Appendix

34

MIDI Data Format / MIDI-Datenformat /

Format des données MIDI / Formato de datos MIDI

If you’re already very familiar with MIDI, or are using a

computer to control your music hardware with computer-

gener-ated MIDI messages, the data provided in this section

can help you to control the CLP-110.

Falls Sie bereits mit MIDI vertraut sind oder einen

Computer zur Erzeugung von MIDI-Steuermeldungen für die

Instrumente verwenden, können Sie sich zur Steuerung des

CLP-110 nach den im folgenden Abschnitt aufgeführten

Spezifikationen richten.

Si vous êtes très familier avec l’interface MIDI ou si vous

utilisez un ordinateur pour commander votre matériel de

musique au moyen de messages MIDI générés par

ordinateur, les données suivantes vous seront utiles et vous

aideront à commander le CLP-110.

SI usted está ya familiarizado con MIDI, o si emplea una

computadora para controlar sus aparatos musicales con

mensajes MIDI generados por computadora, los datos

proporcionados en esta sección le ayudarán a controlar la

CLP-110.

1. NOTE ON/OFF

Data format: [9nH] -> [kk] -> [vv]
9nH = Note ON/OFF event (n = channel number)
kk = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 /
Receive: 00H ~ 7FH = C-2 ~ G8)*
vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)
Data format: [8nH] -> [kk] -> [vv] (reception only)
8nH = Note OFF event (n = channel number)
kk = Note number: 00H ~ 7FH = C-2 ~ G8
vv = Velocity
* If received value exceeds the supported range for the
selected voice, the note is adjusted by the necessary num-
ber of octaves.

2. CONTROL CHANGE

Data format: [BnH] -> [cc] -> [vv]
BnH = Control change (n = channel number)
cc = Control number
vv = Data Range

(1) Bank Select

ccH Parameter Data Range (vvH)
00H Bank Select MSB 00H:Normal
20H Bank Select LSB 00H...7FH
Bank selection processing does not occur until receipt of
next Program Change message.

(2)Main Volume (reception only)

ccH Parameter Data Range (vvH)
07H Volume MSB 00H...7FH

(3)Expression (reception only)

ccH Parameter Data Range (vvH)
0BH Expression MSB 00H...7FH

(4)Damper

ccH Parameter Data Range (vvH)
40H Damper MSB 00H...7FH

(5)Sostenuto (reception only)

ccH Parameter Data Range (vvH)
42H Sostenuto 00H-3FH:off, 40H-7FH:on

(6)Soft Pedal (reception only)

ccH Parameter Data Range (vvH)
43H Soft Pedal 00H-3FH:off, 40H-7FH:on

(7)Effect1 Depth (Reverb Send Level)

ccH Parameter Data Range (vvH)
5BH Effect1 Depth 00H...7FH
Adjusts the reverb send level.

(8)Effect4 Depth (Variation Effect Send Level) (reception
only)

ccH Parameter Data Range (vvH)
5EH Effect4 Depth 00H...7FH

3. MODE MESSAGES

Data format: [BnH] -> [cc] -> [vv]
BnH = Control event (n = channel number)
cc = Control number
vv = Data Range

(1)All Sound Off

ccH Parameter Data Range (vvH)
78H All Sound Off 00H

Switches off all sound from the channel. Does not reset Note
On and Hold On conditions established by Channel Messages.

(2)Reset All Controllers

ccH Parameter Data Range (vvH)
79H Reset All Controllers 00H
Resets controllers as follows.
Controller Value
Expression 127 (max)
Damper Pedal 0 (off)
Sostenuto 0 (off)
Soft Pedal 0 (off)

(3)Local Control (reception only)

ccH Parameter Data Range (vvH)
7AH Local Control 00H (off), 7FH (on)

(4)All Notes Off

ccH Parameter Data Range (vvH)
7BH All Notes Off 00H

Switches OFF all the notes that are currently ON on the spec-
ified channel. Any notes being held by the damper or soste-
nuto pedal will continue to sound until the pedal is released.

(5)Omni Off (reception only)

ccH Parameter Data Range (vvH)
7CH Omni Off 00H
Same processing as for All Notes Off.

(6)Omni On (reception only)

ccH Parameter Data Range (vvH)
7DH Omni On 00H
Same processing as for All Notes Off.

(7)Mono (reception only)

ccH Parameter Data Range (vvH)
7EH Mono 00H
Same processing as for All Sound Off.

(8)Poly (reception only)

ccH Parameter Data Range (vvH)
7FH Poly 00H
Same processing as for All Sound Off.
•When control change reception is turned OFF, control change
data will not be transmitted or received except for Bank Select
and Mode messages.

•Local on/off, OMNI on/off are not transmitted. (The appropriate
note off number is supplied with “All Note Off” transmission).

• When a voice bank MSB/LSB is received, the number is
stored in the internal buffer regardless of the received order,
then the stored value is used to select the appropriate voice
when a program change message is received.
• The Multi-timbre and Poly modes are always active. No
change occurs when OMNI ON, OMNI OFF, MONO, or POLY
mode messages are received.