Yamaha CLP-611, CLP-811

You can use function F4 to

make various settings related to

dual play — see page 29 for

details.

If you select [STRINGS] as

one of the voices, you can use

function F4 to select a slower

string attack.

Terminating DUAL

mode...

Pressing any one of the voice

selectors will select the corre-

sponding voice and return you

to normal mode.

Handling of effects

If both voices are set to their standard effects at the time you enter DUAL mode, the

Clavinova will automatically select the effect and depth to be applied for the combination. In

all other cases, the Clavinova will set the effect as follows.

[Type]

a) If both voices are set to the same effect...

Each voice retains its original effect.

b) If effect for one voice only is OFF...

Each voice retains its original effect settings. One voice receives no effect; the other

receives the effect set up prior to entry into DUAL mode.

c) If the two voices are set to different effects ...

The effect setting for Voice

1 is used for both voices. The effect setting for Voice

2 is

forced off until DUAL mode terminates.

d) If you change the EFFECT type while DUAL mode is in progress, the Clavinova will

apply the newly selected effect to both voices.

[Depth]

You can set the depth to any level using function F4.

SPLIT Mode (Dividing the keyboard)

This feature allows you to divide the keyboard into left and right zones. You can select the split point,

and assign a different voice to each zone.

Procedure

Enter SPLIT mode.

Press [SPLIT].

The SPLIT indicator

lights up.

The Clavinova

automatically

selects the default

voice (BASS if CLP-811; STRINGS if CLP-611) for the left zone.

You can use function F5 to make various settings related to split play —

see page 29 for details.

Select the split point.

Hold down [SPLIT] and hit

the key at which you want

to split the keyboard. If you

omit this operation, the

Clavinova automatically

sets the split point to F#2.

BRILLIANCE

REVERB EFFECT TOUCH

TEMPO

NORMAL

ROOM

MEDIUM

SPLIT

Split point

SPLIT or DUAL...

It is not possible to use the DUAL

and SPLIT features at the same

time.

The “split point” is the highest

note in the left zone.

Handling of VARIATION

You can select VARIATION

independently for each of the two

voices. During SPLIT mode, the

VARIATION lamp and voice

indicator show the status of the

right-zone voice only.

While you are holding the

[SPLIT] button down, however,

the lamps change to show the

status for the left-zone voice.

You can also use function F5 to

set the split point (see page 29).

BRILLIANCE

REVERB EFFECT TOUCH

NORMAL

ROOM

MEDIUM

SPLIT

TEMPO

Voice for right zoneVoice for left zone

CLP-811/611 Selecting and Playing Voices

BRILLIANCE

REVERBEFFECT TOUCH

TRANSPOSE

MELLOW

NORMAL

BRIGHT

ROOM

HALL 1

HALL 2

STAGE

CHORUS

SYMPHONIC

TREMOLO

ECHO

HARD

MEDIUM

SOFT

FIXED

SONG

MEASURE

TEMPO

SPLIT

FUNCTION

MASTER VOLUME

TRANSPOSE SPLIT

BRILLIANCEREVERB EFFECT TOUCH

VARIATIONPIANO 1 PIANO 2 CLAVI.TONEE.PIANO1 E.PIANO2

VIBES STRINGS CHOIR BASS

HARPSI-

CHORD

PIPE

ORGAN ORGAN

COMBINATION

METRONOME

TEMPO

–

YES

SONG

SELECT START

STOP REC

RECORDER

DEMO

PIANO SONG

MAX

MIN

Voice selector

[SPLIT]