Yamaha CLP-611, CLP-811

CLP-811/611 Configuration Functions (FUNCTION mode)

Function descriptions

F1.Tune (Keyboard fine tuning)

You use this function to fine-tune the pitch over

the entire keyboard. This function is useful, for

example, when you need to adjust tuning when

playing with other instruments.

1To access this item, enter FUNCTION mode and

select main function F1.

2The screen shows the current pitch (in hertz) for key

A3. You can adjust the pitch (in increments of about

0.2 hertz) by pressing [-/NO] or [+/YES]. The adjust-

ment automatically carries over to all keys on the

keyboard.

Values: 427.0 to 453.0 (hertz)

Default: 440.0 (hertz)

• Hertz: Frequency, in cycles per second; abbreviated as

“Hz”. The frequency of a sound wave determines its

pitch, with higher frequencies producing higher pitches.

NOTE

You can make the same adjustment directly from

the keyboard without entering [FUNCTION]

mode, as follows.

To raise the pitch (by about 0.2 Hz)...

Hold down the two lowest white keys (A-1 and B-1) and

hit any key from C3 to B3.

To lower the pitch (by about 0.2 Hz)...

Hold down the two lowest keys (A-1 and A#-1) and hit any

key from C3 to B3.

To reset to standard pitch...

Hold down the three lowest keys (A-1, A#-1, B-1) and hit

any key from C3 to B3.

NOTE

You can also adjust pitch in increments of about 1

Hz (without entering FUNCTION mode) as

follows.

To raise or lower the pitch...

Hold down keys A-1 and B-1 (the two lowest white keys)

or else A-1 and A#-1 (the two lowest keys), and press [-/

NO] or [+/YES].

To reset to standard pitch...

Hold down keys A-1 and B-1 or else A-1 and A#-1 and

press

[-/NO] and [+/YES] at the same time.

(Note that the screen will show the TUNE display when

you hold down keys A-1 and either A#-1 or B-1, and will

then return to normal display when these keys are re-

leased.)

F2.KTune (Key-by-key fine tuning)

This function lets you adjust the pitch of indi-

vidual keys, so that you can set up your own

customized scaling system (temperament). The

function also allows you to switch this custom-

ized scaling system OFF or ON at any time.

1To access this item, enter FUNCTION mode and

proceed to main function F2.

2The screen indicates whether the function is ON or

OFF. You can toggle the setting by pressing either

[-/NO] or [+/YES]. You must set the function ON if

you wish to adjust the tuning.

Values: ON, OFF

Default: OFF

• The ON/OFF setting determines whether this customized

tuning is used during play. Set ON to use the tuning, or

OFF to use standard tuning.

3After setting the function ON, hit the key that you

want to tune.

The screen displays the name of the struck key.

4You can now adjust the pitch for that key by pressing

[-/NO] or [+/YES]. Adjustment is in 1-cent incre-

ments, and is indicated as a relative value (“0”

produces standard pitch).

Values: -50,...,+50 (cents)

Default: 0 (standard pitch) for all keys

You can repeat this procedure (3 and 4) to adjust pitch

for as many keys as you like.

Cent: One-hundredth of a semitone. (100 cents = 1 semitone)

To reset fine tuning of all keys to “0”...

1Press down the three lowest keys on the keyboard

(A-1, A#-1, and B-1) at the same time. The screen will

display the following.

2Press [+/YES] to reset.

BRILLIANCE

REVERB EFFECT TOUCH

NORMALROOM MEDIUM

TEMPO

BRILLIANCE

REVERB EFFECT TOUCH

NORMALROOM MEDIUM

TEMPO

3 4

BRILLIANCE

REVERB EFFECT TOUCH

NORMALROOM MEDIUM

TEMPO

BRILLIANCE

REVERB EFFECT TOUCH

NORMALROOM MEDIUM

TEMPO