32 CLP-811/611 Configuration Functions (FUNCTION mode)
F7.Metronome (Metronome settings)
This function sets the beat and volume for the
metronome.
1To access these settings, enter FUNCTION mode and
go to main function F7.
2Next, press [+/YES] to enter the subfunction group. If
necessary, use [t] or [s] to select the subfunction
(either “Beat” or “Volume”), and then use [+/YES] or
[-NO] to set the value.
Subfunctions
7.1 Beat
Values: NORMAL (no beat), 2, 3, 4, 5, 6
Default: NORMAL
7.2 Volume
Values: 1,...,20
Default: 10
NOTE
You can also set the metronome volume without
entering FUNCTION mode. Simply hold down
the [METRONOME] button and press [-NO] or
[+/YES] to change the setting.
NOTE
As a shortcut, you can switch directly into the
metronome setup function by holding down
[METRONOME] and pressing [FUNCTION].
Once you have changed the settings, press
[FUNCTION] again to return to normal mode.
F8.Display (Display mode)
This function selects the type of information
displayed in the screen areas indicated below.
1To access this item, enter FUNCTION mode and go to
main function F8.
2Press [-/NO] or [+/YES] to change the setting.
Values: NORM, CHORD, VELO, MIDI
Default: NORM
Explanation
NORM (normal)
CHORD
• The bar graph shows the volume of each note being hit,
where the leftmost bar indicates note C (of any octave) and
the rightmost bar shows note B (of any octave). If you hit
two or more like-named notes (for example, C1 and C3), the
graph indicates the volume for the loudest of these.
BRILLIANCE
REVERB EFFECT TOUCH
NORMALROOM MEDIUM
TEMPO
21
BRILLIANCE
REVERB EFFECT TOUCH
NORMALROOM MEDIUM
TEMPO
21
BRILLIANCE
REVERB EFFECT TOUCH
NORMALROOM MEDIUM
TEMPO
Here
Here
BRILLIANCE
REVERB EFFECT TOUCH
NORMALROOM MEDIUM
TEMPO
Voice name
Instrument icon
BRILLIANCE
REVERB EFFECT TOUCH
NORMALROOM MEDIUM
TEMPO
Name of chord played at keyboard
D
b
CE
b
DA
b
GB
b
ABF
#
EF
Volume of each note being hit