14
CLP-910
A
-1
C#
0C
1D#2C4D#5
1356810121315 1356810121315
2 4 7 9 11 14 16 2 4 7 9 11 14 16
E5
E2
Setting the Clavinova MIDI Channels
For setting the transmit
channel. (C1 ~ D#2)
For setting the receive
channel. (C4 ~ D#5)
For ALL mode
ZSimultaneously press and hold the A-1 and C#0 keys.
XPress the key on the keyboard corresponding to the desired MIDI transmit or receive
channel.*
CRelease the A-1 and C#0 keys.
* Keys C1 through D#2 on the keyboard are used to set the MIDI transmit channel. The E2
key turns transmission “OFF” if you don’t want the Clavinova to transmit MIDI data. Keys
C4 through D#5 are used to set the MIDI receive channel as shown in the illustration
below. The E5 key sets the receive mode to “ALL”.
NOTE
When the power is initially turned ON, MIDI receive is set to the ALL mode and
the transmit channel is set to 1.
In the dual mode the left-button voice will be transmitted on the specified transmit
channel number while the right-button voice will be transmitted on the next
channel number (i.e. the specified transmit channel number + 1). Neither voice
will be transmitted when the transmit channel is set to OFF.
Demo song data is not transmitted via MIDI.
No MIDI reception occurs when the demo song mode is engaged.
Program change and other like channel messages received will not affect the
Clavinovas panel settings or what is being played on the keyboard.
MIDI Functions
Local Control ON/OFF.............................................................................................................................................................
“Local Control” refers to the fact that, normally, the Clavinova keyboard controls its
internal tone generator, allowing the internal voices to be played directly from the keyboard.
This situation is “Local Control ON” since the internal tone generator is controlled locally by
its own keyboard.
Local control can be turned OFF, however, so that the Clavinova keyboard does not play
the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT
connector when notes are played on the keyboard. At the same time, the internal tone generator
responds to MIDI information received via the MIDI IN connector.
When using the DOU-10 Disk Orchestra Unit with the Clavinova, for example, Local
Control should be turned OFF when recording using the DOU-10 voices only, and ON when
recording the Clavinova voices while listening to playback of the DOU-10 voices.
ZSimultaneously press and hold the A-1 and C#0 keys.
XPress the C6 key to switch the Local Control between OFF and ON.
CRelease the A-1 and C#0 keys.
NOTE
When the power is initially turned ON, Local Control is set to ON.
OFF
A
-1
C#
0
C
6
DOU-10
MIDI OUT MIDI
IN
Clavinova