Installing the driver on Windows 2000

1Start the computer and use the “Administrator” account to log on to Windows 2000.

2Select [My Computer] → [Control Panel] → [System] → [Hardware] → [Driver Signing] → [File Signature

Verification], and check the radio button to the left of “Ignore—Install all files, regardless of file signature” and click [OK].

3Insert the included CD-ROM into the CD-ROM drive. The Start window will appear automatically.

4First, make sure the POWER switch on the instrument is set to OFF, then use a USB cable to connect the USB connector of the computer to the USB TO HOST connector of the instrument.

When the instrument is turned on, the computer automatically displays the “Found New Hardware Wizard.” Click [Next].

(The Wizard window may take a while to display on some computers.)

If the Wizard window is not displayed automatically, refer to “Troubleshooting.”

5Check the radio button to the left of “Search for a suitable driver for my device (Recommended).” Click [Next].

6Check the “CD-ROM drives” box and uncheck all other items. Click [Next].

nThe system may ask you to insert a Windows CD-ROM while it checks for the driver. Specify the “USBdrv2k_” folder of the CD- ROM drive (such as D:\USBdrv2k_\) and continue the installation.

7Click [Next].

n If the Wizard panel informs you that “The software you are about

to install does not contain a Microsoft digital signature,” click [Yes].

8When the installation is complete, the system displays “Completing the Found New Hardware Wizard.” Click [Finish]. (The Wizard window may take a while to display on some computers.)

9Restart the computer.

The USB-MIDI driver installation is complete.

Installing the driver on Windows Vista

1Start the computer and use the “Administrator” account to log on to Windows Vista.

2Insert the included CD-ROM into the CD-ROM drive. The AutoPlay window will appear.

3Click [Run Start.exe].

The Start window will appear automatically.

4First, make sure the POWER switch on the instrument is set to OFF, then use a USB cable to connect the USB connector of the computer to the USB TO HOST connector of the instrument. When the instrument is turned on, the computer automatically displays the “Found New Hardware” window. Click “Locate and install driver software (recommended)”.

If the window is not displayed automatically, refer to “Troubleshooting.” (Some computers may take a while to display the window.)

n If the “User Account Control” window appears, click [Continue].

5If a message allowing Windows to search online for driver software appears, click “Don’t search online.”

6If a message prompting you to insert the disk that came with your device appears, click [Next].

The system starts the installation.

nIf the “Windows Security” window appears, confirm this software is authored by Yamaha Corporation then click [Install].

7When the installation is complete, the system displays the message “The software for this device has been successfully installed.” Click [Close].

(Some computers may take a while to display the window.) The USB-MIDI driver installation is complete.

English

Accessory CD-ROM for Windows Installation Guide 5